Folding Arm² with new product types
With already more than 450 pieces Folding Arm² with new technology left our stock, the new development enjoys great demand and very good reputation. To follow the previous actuator versions of the Folding Arm I the development was pushed in the recent months to offer you the Folding Arm², beside the original version of 800 N, in a 500 N and also 1000 N version. As well there will be available a new version of our proven folding arm door opener, too.Folding Arm² EA-KL² with 500, 800 and 1000 N
The new Folding Arm² is truly a highlight. In addition he has passed the Ventilator tests regarding EN 12101-2 together with the Schüco AWS-57-RO profile this summer and has proved its skills and endurance for the case of smoke and heat exhaust. Now we can offer a 500 N and 1000 N force version of the known 800 N one we have showed first time on the exhibition BAU 2011 this year in Munich. The housing dimensions, the stroke of 710 mm and the types of brackets are being the same.
M2 1471 Folding Arm² EA-KL²-50 (500 N Force)
M2 1470 Folding Arm² EA-KL²-80 (800 N Force)
M2 1472 Folding Arm² EA-KL²-100 (1000 N Force)
available brackets:
K2 1610 K-KL²-M for mounting at the main closing edge - outwards opening
K2 1611 K-KL²-I for mounting - inwards opening
K2 1612 K-KL²-S for mounting sideways - outwards opening
K2 1613 K-KL²-M(S)-AW57RO for mounting at Schüco AW57RO profiles
K2 1616 K-KL²-M(S)-RAICO105D for mounting at Raico 105D profiles
More technical details on our product page about the Folding Arm².
Folding Arm² Door Opener EA-KL²-T
The door opener type of the Folding Arm² offers with 300 N enough force for the opening of doors for fresh air in the case of an alarm. With an opening angle up to 125° the door can be opened completely. The speed until end position is decreasing to 32 seconds against the former door opener actuator. The choice of brackets will be very easy with the new Folding Arm² door opener. As known there was because of the special shape of the housing of the previous model two different types of each bracket. Now with the symmetrical housing you just need to define if the door opener will be mounted in the reveal or at the wall. The brackets are designed independent of the direction of door opening. Through the included programming mode the door opener will be converted quickly and easily before mounting on a right handed door (delivery status) for a use on a left handed door. The lever moves to the opposite direction and sets it as a new zero point. The supplied mounting flange can be easily changed in the normalized case from side to side directly on-site. Likewise feel free to use the one-armed lever on top or bottom side of the case when mounting the door opener with backside to the wall. The aluminium tread for the roll, for attaching to the door, will be included to the actuator.
M2 1475 Folding Arm² Door Opener EA-KL²-T
available brackets:
K2 1620 K-KL²-T-MW Mouting angle for installation in the reveal
K2 1621 K-KL²-T-MP Mounting plate for installation at the wall
For more technical details please have look to the product page about the Folding Arm² Door Opener.
Although it is already available the development of the Folding Arm² won't stop. In short time we will offer the possibilty to programm the stroke and other settings by your own directly on-site.
Do you have a current project for the Folding Arm² or do you need further information? We as partner support you from planning until installation. We are looking forward to hear from you.
